Stapler Faults - Xerox 4590 User Manual

Stapler faults

X er o x 4 5 90 EP S / 4110 EP S Us e r G ui d e
Perform the procedures on the following pages when prints are
not stapled or when staples are bent. Contact the Customer
Support Center if the problem persists after you have tried these
solutions.
If staples are stapled on the documents in the manner shown in
the illustrations, contact the Customer Support Center.
KEY POINT: Remove the bent staple when opening the staple
cartridge cover. If you do not remove the bent staple, a staple jam
may occur as a result. Use the staple cartridge cover only when
removing the bent staple.
6 . P r o b le m S o l vi n g
6-59