How To Load Paper And Media; Loading Paper Trays 1 And 2 - Xerox DocuColor 240 Supplementary Manual

Xerox docucolor 240: supplementary guide
Hide thumbs Also See for DocuColor 240:
Table of Contents

Advertisement

How To Load Paper and Media

Loading Paper Trays 1 and 2

Trays 1 and 2 can take 520 sheets of 20lb from 8.5"x5.5" to 11"x17" paper in a
variety of different media stock. The following procedure shows you how to load
Tray 1 with 8.5"x11" paper.
1. Fan the sheets before loading them into the tray. Register the stack of
paper against the left side of the tray. Paper must not be loaded above
the maximum fill line.
2. Move the right guide to touch the paper stack.
3. Move the front and rear guides to just touch the edges of the paper stack.
If enabled by your System Administrator, the Paper Tray settings screen may be
displayed on the touch screen. Alternatively, you can change the Paper Size and
Paper Type by touching the All Services button on the control panel, then
selecting Setup Menu and Paper Tray Attributes on the touch screen.
The Paper Type screen allows you to select the paper type (Heavyweight,
Transparency, Tabs, Hole Punched, etc.) from a list of available paper types. If
enabled by your System Administrator, the Paper Type screen may also allow
you to specify the color of the paper loaded into the tray. After you have made
your Paper Type selection (and Paper Color selection, if applicable), touch the
Save button.
These paper trays automatically detect the dimensions of standard sized
paper. For standard paper sizes, you will not need to change the Paper Size
settings. However, you will need to specify a Paper Size value if you load a non-
standard paper size.
The Paper Size screen allows you to specify the size of the paper you load into
the paper tray. The Auto Size Detect option allows standard sized paper
loaded in the trays to be automatically detected by the machine.
The Variable Size screen allows you to specify the exact size of the paper you
load into the paper tray. You can use the arrow buttons on the touch screen to
change the X and Y dimension values for the paper you load. After you have
changed your Paper Size information, touch the Save button.
DocuColor 240/250 Training and Information Guide
DocuColor 240/250
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucolor 250Dc240 - docucolor 240 color laser

Table of Contents