Change/Verify The Paper Tray Attribute Settings; Map The Paper Type And Weight - Xerox 4590 User Manual

Change/verify the Paper Tray Attribute settings

Map the paper type and weight

Printer Paper Types &
Weights
2
Plain (64-105 g/m )
Recycled (64-105 g/m
Lightweight (52-63 g/m
Heavyweight 1 (106-216 g/m
Heavyweight 2 (217-253 g/m
Plain (Side 2)
Hole Punched
Transparency
Tab Stock 1 (106-216 g/m
X er o x 4 5 90 EP S / 4110 EP S Us e r G ui d e
NOTE: For information on programming paper tray attributes on
the DocuSP Controller, refer to the DocuSP online Help.
If paper in a tray has changed, the paper tray attribute settings
associated with that tray may need to be modified. The following
describes how to change the paper type settings to match the
paper type currently loaded in the paper trays.
KEY POINT: It is very important to identify the actual Paper Type
settings for any media loaded into the paper trays.
NOTE: This procedure requires a System Administrator
password. Contact your System Administrator for assistance with
this procedure.
NOTE: For information about how to set names to custom paper
(up to five), refer to "Custom Paper Name" in the System
Administration Guide or contact your System Administrator.
KEY POINT: The tray programming options available on the
Printer do not consistently correspond with the tray programming
options on the DocuSP. When selecting the paper type or weight
on both the printer UI and the DocuSP UI, refer to the name
mapping table below. This table shows which Paper Types &
Weights on the Printer UI correspond to which Paper Types and
Weights on the DocuSP UI.
Paper Type names and weight
DocuSP Paper
Types
Plain
Recycled
2
)
Plain
2
)
) Plain
2
2 ) Plain
Plain
Plain
Drilled
Transparency
Full-Cut Tab
2
)
2 . P ap er a nd o th e r m ed i a
DocuSP Paper Paper can be used
2 in which trays:
weight (g/m )
75 All (Trays 1, 2, 3, 4,
5, 6, 7, and 8)
75 All
60 All
150 All
250 (or 150 if 250 is Trays 5 and 8
not available)
75 All
75 All
75 Tray 5
150 Trays 3, 4, 5, and 8
2-21