Manually Confirm/Change The Tray Settings On The Docusp - Xerox 4590 User Manual

2. P a p er an d o th e r m e di a

Manually confirm/change the tray settings on the DocuSP

2- 3 2
KEY POINT: You can quickly and easily check the status of the
printer trays from the DocuSP by selecting Printer Status from
the Printer pull-down menu. The settings for the individual trays
cannot be changed from here. In order to change the settings,
perform the procedure provided in this section.
NOTE: The UI screens shown may or may not reflect your system
configuration. The UI screens vary from system to system and
from marketplace to marketplace. Therefore, the UI screens
shown here are a representation of the type of screens that may
be seen on your particular system
You can manually confirm and/or change the paper tray settings
on the DocuSP UI by performing the following steps.
KEY POINT: You must be logged on as the System Administrator
in order to make changes to the paper tray settings.
From the DocuSP UI, select the Logon pull-down menu and
1.
select Logon...
From the Logon screen, select System Administrator from
2.
the User Name pull-down menu.
Enter the correct Password and select OK.
3.
From Services, select Printer.
4.
X e r o x 4 5 90 E P S /4 11 0 E P S Us e r G ui d e