Automatic Tray Switching Feature; Load While Run; Paper Tray Programming - Xerox 4590 User Manual

Automatic tray switching feature

Load While Run

Paper tray programming

X er o x 4 5 90 EP S / 4110 EP S Us e r G ui d e
When the paper tray currently being used is empty, the machine
automatically switches to another tray containing paper of the
same size, weight, type and feeding orientation (SEF or LEF) as
the tray currently being used.
This feature is enabled from the Administration Mode in the Paper
Tray Settings screen.
See your System Administrator. Details about the paper tray
settings are found in the System Administration Guide.
For continuous and uninterrupted printing, this feature allows
toner to be replaced and paper stock to be loaded in the trays
while the printer is still printing.
NOTE: For information on programming paper tray attributes on
the DocuSP Controller, refer to the DocuSP online Help.
Once you load the paper in the printer paper trays, you may need
to update the paper tray attribute settings to match the tray
contents. The Paper Color attribute for all trays must be set at the
Printer Manager on the DocuSP Controller. Settings for the Paper
Type, Paper Weight and Paper Size are programmed at either the
machine user interface or the DocuSP Controller depending on
the tray.
The paper tray attribute settings for trays 1-4 and 6-7 are
programmed on the machine user interface and the settings are
automatically uploaded to the Printer Manager on the DocuSP
Controller.
The paper tray attribute settings for Tray 5 (Bypass), however, are
programmed at the DocuSP Controller. Since Tray 5 does not
have stock size guides, do not program Tray 5 settings at the
machine user interface. The DocuSP Controller will download the
settings from the Printer Manager to the printer and set the tray
attributes for Tray 5.
Set or change all Tray 8 paper tray attributes at the DocuSP
Controller.
2 . P ap er a nd o th e r m ed i a
2-5