Xerox 4590 User Manual page 11

No. Component
1 DocuSP Controller
2 User Interface
3 Power switch
4 Front cover
5 Left cover
6 Tray 1, 2, 3, 4
7 Locking casters
8 Bottom left cover
9 Front cover for the
optional Trays 6, 7
10 HCF (Trays 6, 7)
11 OHCF (Tray 6)
12 Tray 5 (Bypass)
X er o x 4 5 90 EP S / 4110 EP S Us e r G ui d e
The DocuSP Print Services software that provides a graphical user interface
(GUI) to the printer for setting up and printing jobs, setting up the printer,
controlling system-level preferences, and managing fonts, security,
accounting, and many other activities.
The User Interface (UI) is attached to the machine and consists of the Control
Panel and the Touch Screen. Refer to "User Interface (UI)" in this chapter.
Switches on/off the machine power.
Open this cover to clear paper jams and to replace the waste toner bottles.
Open this cover to replace the toner cartridge.
Contains the media used for print output.
Locks the wheels of the machine. Lock these casters after moving the machine
to its installation site.
Open this cover to remove paper jams.
Open this cover to access the bottom left cover. This cover and Trays 6 and 7
are part of the optional High Capacity Feeder (HCF).
Optional High Capacity Feeder contains 2,000 sheets per tray for print output.
Alternative to the 2-drawer HCF, the optional Oversized High Capacity Feeder
feeds oversized stock up to 13 x 19 in/SRA3 paper.
Load nonstandard paper (heavy stock or other special media) that cannot be
loaded in trays 1-4. It can be folded away when not in use and extended to
support longer length stock.
1 . P r od u c t o v e r v ie w
Function
1-5