Xerox 4590 User Manual page 91

Enterprise printing systems
Hide thumbs Also See for Xerox 4590:
Table of Contents

Advertisement

Symptoms
Paper is often
Is paper loaded properly in the
jammed or
paper tray?
wrinkled.
Is the paper tray set properly?
Is the paper damp?
Is the paper curled?
Are the paper and paper tray
settings correct?
Are there any torn pieces of paper
still remaining inside the machine
or is there a foreign object in the
machine?
Is out-of-spec paper loaded in the
tray?
Is paper loaded in the paper tray
past its maximum fill line?
Is the paper guide set correctly?
An error
Check the position of the paper
message is
guides at the front side of paper
displayed after
Tray 5 (Bypass).
paper is loaded
in paper Tray 5
(Bypass) and the
Start button is
pressed.
Stapler faults
X er o x 4 5 90 EP S / 4110 EP S Us e r G ui d e
Check
Load paper correctly.
Refer to "Loading paper in trays 1 and 2" in chapter
3.
Firmly push in the paper tray as far as possible to
set it properly.
Refer to "Loading paper in trays 1 and 2" in chapter
3.
Replace with paper from a new ream.
Refer to "Loading paper" in Chapter 3.
Either turn the paper so that the curl is facing down
in the paper tray, or replace with paper from a new
ream.
Refer to "Loading paper" in Chapter 3.
Make sure the paper and paper tray match the
configured paper size.
Refer to "Paper Tray Settings" in the System
Administration Guide.
Open the door of the machine or slide out the paper
tray to remove the torn paper or the foreign object.
Refer to "Paper Jams" in this chapter or "Loading
paper" in Chapter 3.
Replace with paper that meets machine
specifications.
Refer to "Loading paper" in Chapter 3.
Load paper in the paper tray so that it does not
exceed the maximum fill line.
Refer to "Loading paper in trays 1 and 2" in chapter
3.
Load the paper correctly, and apply the paper
guides lightly.
Refer to "Loading paper" in Chapter 3 or "Changing
the size of paper trays" in Chapter 3.
Set the paper guides to the correct positions.
Refer to "Loading paper in Tray 5" in Chapter 3.
Refer to "Stapler faults" in this chapter.
6 . P r o b le m S o l vi n g
Remedy
6-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xerox 41104590

Table of Contents