Symptoms
Check
White areas or
Is the paper damp?
stripes appear.
The paper in use is unsuitable.
The entire page is
When the print was made using
printed faint.
Tray 5 (Bypass), the size and
type of the actually loaded paper
differed from the setting on the
print driver.
Two or more sheets may be
feeding at once.
Paper becomes
The paper in use is unsuitable.
wrinkled.
Paper is being added while it is
Text is blurred.
being fed.
Is the paper damp?
X er o x 4 5 90 EP S / 4110 EP S Us e r G ui d e
Remedy
Replace with paper from a new ream.
Refer to "Loading paper" in Chapter 3.
Load suitable paper.
Refer to "Loading paper" in Chapter 3.
Either load paper of the correct size and type into
Tray 5 (Bypass), or fan the paper thoroughly
before loading it again.
Refer to "Loading paper in Tray 5" in Chapter 3.
Fan the paper well and reset.
Refer to "Loading paper" in Chapter 3.
Replace with paper from a new ream.
Refer to "Loading paper" in Chapter 3.
6 . P r o b le m S o l vi n g
6-9