Solving Curled Output - Xerox 4590 User Manual

6. P r o b le m S o l v in g

Solving curled output

6- 6 4
Use the De-curl button on the machine to correct curling of the
output. The De-curl button functions when in operation as well as
when the machine is powered on but idle.
To change the curling correction mode while the machine is in
operation, press the De-curl button and the change is applied
immediately.
NOTE: Pressing the Reset button on the Control Panel cannot
change the curling correction mode.
Check how the output copy is curled.
1.
Check the De-curl lights.
2.
• When turning on the power of this machine, the de-curl
mode is set to Auto.
• When you cancel the Power Saver Mode, the de-curl
mode will be set to Auto.
Press De-curl.
3.
NOTE: Pressing the De-curl button toggles the mode between
Auto, ON, and OFF. For more information, refer to "Mode and
function of De-curl button" in this chapter.
X e r o x 4 5 90 E P S /4 11 0 E P S Us e r G ui d e