Mixed-Media Configurations; Figure A-5 Base Module Mixed-Media Cells; Figure A-6 Mixed-Media Firmware Cell Mapping; Figure A-7 Mixed-Media Scsi Element Numbering Mapping - Sun Microsystems StorageTek SL500 User Manual

Mixed-Media Configurations

The following figures show mixed-media storage cell and tape drive locations.
FIGURE
■
only a Base Module.
FIGURE
■
with a Base Module that has eight reserved cells, one Drive Expansion Module, and
one Cartridge Expansion Module.
FIGURE
■
a library with a Base Module that has two reserved cells, one Drive Expansion
Module, and one Cartridge Expansion Module. The storage cell numbering begins
with the first cell after the reserved cells in column 1. The figure shows two reserved
cells, but there could be more. If the reserved cells are configured as storage cells, the
top cell (row 1) would be 1.
FIGURE
■
page 341
which type of module is installed above and below it.
96116 • Revision: KA
A-5, "Base Module Mixed-Media Cells" on page 338
A-6, "Mixed-Media Firmware Cell Mapping" on page 339
A-7, "Mixed-Media SCSI Element Numbering Mapping" on page 340
A-8, "Mixed-Media Cells for Back Wall of Cartridge Expansion Module" on
shows the cell capacity of a Cartridge Expansion Module according to
Appendix A SL500 Wall Diagrams and Specifications 337
Mixed-Media Configurations
shows a library with
shows a library
shows