HandBot Utility Tasks
Define a Diagnostic Move
▼
Multiple diagnostic move routines can be set up and run simultaneously, as long as the
target and pool address ranges do not overlap.
Note – This procedure requires sharing of HandBot resources; therefore, it is not
recommended that you run it during peak activity periods.
1. Select Tools > Diagnostics.
2. Click the Library folder on the device tree.
The Library screen appears.
3. Click the DiagMove tab and then the Manage tab.
The Diagnostic Move Manage screen appears.
286 SL500 User's Guide • July 2008
Revision: KA • 96116