Partitions-Summary (Step 2)-Modify Connection - Sun Microsystems StorageTek SL500 User Manual

Partition Summary Screens
Partitions—Summary (Step 2)—Modify Connection
Sample Screen
Description
Allows you to modify the configuration of the selected host-partition connection.
This screen is a popup that appears when you click Modify Connection on the
Partitions—Summary (Step 2)
Caution – Information in the SL Console partition workspace is saved to the library
controller database only through the Commit (Step 4) screen. If your SL Console
session ends or you refresh the workspace data before you have committed your
updates through the Commit (Step 4) screen, you will lose any partition changes you
have made through the Summary (Step 2) and Design (Step 3) screens and all
associated popups.
Screen Fields
Connections n
Display only.
Partition ID of the selected partition.
Initiator (WWPN)
World Wide Port Name of the host bus adapter (HBA).
Sixteen hexadecimal digits. You can enter upper- or lower-case hex digits, but the
display is always shown in all upper-case.
The screen displays the value assigned previously. You can leave it as is or make
changes.
Target Port
Display only.
Port number of the SL500 library controller. This entry is always "0".
LUN
Required.
204 SL500 User's Guide • July 2008
screen.
Revision: KA • 96116