Table 1-6 Keypad Service Required Led - Sun Microsystems StorageTek SL500 User Manual

TABLE 1-5 Keypad Buttons and Indicators (Continued)
Buttons/Indicator
Service Required
See TABLE 1-6 for details.
Open Door
Open CAP

TABLE 1-6 Keypad Service Required LED

Activity Meaning
Flashing The redundant component failed.
Diagnostics are running.
Diagnostics failed.
Door is open.
On solid The non-redundant component failed.
This includes the last working
component of a redundant set of
components, such as tape drives.
The library has stopped operating.
96116 • Revision: KA
Description
Indicator
LED is normally not lit.
■
LED is lit when the library experiences a failure or is in a
■
non-ready state.
Indicator
LED flashes amber when the Open Door button is pressed.
■
LED is solid amber when the robot is parked in the robotics
■
unit.
LED flashes during initialization and audit.
■
LED is not lit when the library is ready for customer use.
■
Button
When pressed:
1. Software allows the current job to complete. This could take a
while.
2. Software retracts the robot into the robotics unit so that it will
not be damaged when you open the door with the key.
Indicator
LED is amber when any CAP doors are open.
■
LED is not lit when all CAP doors are shut.
■
Button
Button is used to open all CAP doors in a rack.
Action
The service representative might need to
replace the failed redundant component,
such as power supply, tape drive, or
fan.
Nothing, this is normal.
The service representative might need to
check the log_error file for the result
code and perform the appropriate
action.
Close and lock the door.
The service representative might need to
check the log_error and
log_warning files to determine which
component failed, and replace the failed
component.
The service representative might need to
check the log_error file for the result
code and perform the appropriate
action.
Controls and Indicators
Chapter 1 SL500 Introduction 13