Configure Drive Auto Clean - Sun Microsystems StorageTek SL500 User Manual
Modular library system
Hide thumbs
Also See for StorageTek SL500:
- Reference manual (296 pages) ,
- Local operator panel manual (52 pages)
Table of Contents
Advertisement
Drive Cleaning Tasks
Configure Drive Auto Clean
▼
Use this procedure to enable or disable the drive auto clean feature. If the library is
partitioned, auto clean can be enabled or disabled for individual partitions.
Note – This procedure applies only to drives that are not managed by HSC or ACSLS.
See the HSC and ACSLS documentation for details about how they manage automatic
cleaning operations.
1. Select Tools > System Detail, and select the library folder on the device tree.
2. Click Auto Clean and then Configure.
The Configure Auto Clean screen appears.
3. Set the Auto Clean field to Enabled.
4. In the Threshold Configuration section, specify the warning thresholds for each
cartridge type.
5. Click Apply.
106 SL500 User's Guide • July 2008
Revision: KA • 96116
- Quick Links:
- Robotics Unit
Hide quick links:
Advertisement
Table of Contents
