Reboot The Library - Sun Microsystems StorageTek SL500 User Manual

Library Utility Tasks

Reboot the Library

▼
Note – This feature is available starting with SL500 firmware version 1026 and
SL Console version 2.40.
Use this procedure to reboot the library. This process involves reloading the firmware
from flash memory and restarting the library controller.
1. Select Tools > Diagnostics.
2. Click the Library folder on the device tree.
The Library screen appears.
3. Click Reboot in the Options Bar.
The Reboot confirmation popup appears.
4. Click OK to continue.
If the library is online, the Offline confirmation popup appears.
5. Click OK to vary the library offline.
The Reboot confirmation popup appears
6. Click OK to continue.
The SL Console termination popup appears.
268 SL500 User's Guide • July 2008 Revision: KA • 96116