Partition Management Tasks
Reallocate Library Resources
▼
Reallocating library resources (storage cells, tape drives, CAP cells, or cartridges) from
one partition to another is done through the Design (Step 3) screen. You must use the
following two-step process:
1. Remove the resource from the partition it is currently allocated to.
2. Allocate the resource to a different partition.
See
"Design a Partition" on page 162
for detailed instructions.
Caution – Reallocating resources can result in orphaned cartridges and data that could
be lost. See
"Orphaned Cartridges in Partitioned Libraries" on page 152
for details.
96116 • Revision: KA
Chapter 6 Library Partitioning 179