Log In To The Local Operator Panel - Sun Microsystems StorageTek SL500 User Manual

Local Operator Panel

Log in to the Local Operator Panel

▼
Note – Only one user at a time can log in to the local operator panel.
Note – If the touch-screen panel is blank, touch the screen anywhere to activate the
Login screen.
1. Use the keypad to enter your login information (see
on page 33
User ID: SLC_login
Password: password
where:
SLC_login is the SL Console user ID.
■
password is the password assigned to this user ID.
■
Note – The user ID you use determines the screens you can access. See
Security" on page
2. Click Log on.
34 SL500 User's Guide • July 2008
for detailed instructions).
28.
"Enter Data Using the Keypad"
"SL Console
Revision: KA • 96116