Library Management Tasks
Display Library Configuration Information
▼
Use this procedure to display the physical, mechanical, and logical configuration of the
library. Some of the information can is set up automatically during library initialization,
while other information can be defined by the user.
Note – This information is also available through Reports > Library Information. See
"Display a Library Report" on page 74
1. Select Tools > System Detail.
2. Click the Library folder on the device tree.
3. Click the Properties tab, and then the General tab.
The screen displays detailed information about the library.
68 SL500 User's Guide • July 2008
for detailed instructions.
Revision: KA • 96116