FIGURE 1-2 Back View of Library Components
1. Base module
2. Drive expansion module
3. Cartridge expansion module
4. Redundant power supply (see note 1)
Notes
1. If you are ordered only one power supply in a module, it should be installed in the top
location.
2. The host firmware sees tape drive 1; the SCSI firmware sees tape drive 0119.
3. The host firmware sees tape drive 1; the SCSI firmware sees tape drive 0219.
96116 • Revision: KA
4. Standard power supply (see note 1)
5. Library power switch
6. Tape drive 1 in base unit (see note 2)
7. Tape drive 1 in expansion module (see note
3)
Chapter 1 SL500 Introduction 3
Views and Locations