Table B-1 Lto Cartridge Codes - Sun Microsystems StorageTek SL500 User Manual

Discuss whether you want six or eight characters with your service representative. The
representative can set what characters are available with the "orientlabel print" and
"orientlabel" host commands from the command line interface.

TABLE B-1 LTO Cartridge Codes

Label Type of Cartridge
L1 Generation 1 data cartridge
L2 Generation 2 data cartridge
L3 Generation 3 data cartridge
L4* Generation 4 data cartridge
LT Write once read many times (WORM)—400 GB, LTO Gen 3 drive only
This feature prevents the user from altering or erasing information from
the tape. For more information, go to your vendor Web site and do a
search on WORM.
LU Write once read many times (WORM)—800 GB, LTO Gen 4 drive only
CLN plus CU Universal cleaning cartridge
Use this universal label instead of a vendor-unique label (CLN plus C1 for
Hewlett-Packard or CLN plus C2 for IBM).
DG Diagnostic cartridge (apply a DG label to a blank data cartridge to be
used for library diagnostic tests)
Note – Check availability for LTO Gen 4 drives and media. Library firmware
must be Version 1126 or later to support LTO Gen 4 drives and media.
96116 • Revision: KA
LTO (Ultrium) Cartridges
Appendix B Cartridge Information 351