Secure The Front Door (Without Power) - Sun Microsystems StorageTek SL500 User Manual

Secure the Front Door (Without Power)

▼
To secure the front door when no library power exists:
1. Remove the robotic facade from the top of the library by gently pulling the facade
from side to side to pull the ball studs away from the clips. You might have to use a
screwdriver to gently pry it off.
Caution – Possible component damage: Note the door locking lever protruding from the
top of the door. Do not let it hit the robotics park lever when you close the door.
2. While using one hand to move the robotics park lever to the left, use your other hand
to close the door.
3. While still holding the door shut, release the robotics park lever.
4. Use the key to lock the door.
5. The robotics lever automatically moves to the right when the door locking lever
retracts.
96116 • Revision: KA
General Library Operation Tasks
Chapter 9 Manual Operations 319