7. Using a pen tip or similar implement, press the recessed Power button
(
).
FIGURE 3-12
ESCAPE
ENTER
Power Button and Front Panel Detail
FIGURE 3-12
Initial Sun StorageTek 5320 NAS
Appliance Configuration
Note – These instructions apply to the Sun StorageTek 5320 NAS Appliance only.
For cluster configuration instructions, refer to
or NAS Gateway Cluster System configuration instructions, refer to
To complete the initial Sun StorageTek 5320 NAS Appliance configuration, you must
do the following:
Provide an IP address
■
Access the wizard through the Web Administrator
■
Follow the instructions provided by the wizard
■
Power button
Power LED
ESCAPE
ENTER
Chapter 3 Connecting the Sun StorageTek 5320 NAS Appliance
Chapter
4. For NAS Gateway System
Chapter
5.
69