Message List; Cannot - Canon Mk2500 User Manual

Cannot modify.
Input value out of range.
In Vert/Hor char, Character Space
setting not possible.
No data to paste.
Not enough memory.
Character input is no longer
possible.
Length exceeded. Input data
exceeds set length.
Numbering already set for this
page.
Char limit exceed. Exceeded
maximum Number of characters
xxxxxx already exists.
Change the folder name
Not enough memory.
Cannot save any more files.
No files.
No files in selected folder.
Already 50 files in selected folder.
Symbol can not be input
with1.3mm font.
Number of the characters over.
Cannot change.
An attempt was made to select an
unavailable setting.
An attempt was made to input a
value that is outside of the settable
range.
An attempt was made to select
the character spacing when the
printing orientation is set as "Vert/
Hor char".
The paste operation was attempted
while there was no page data to be
pasted.
An attempt was made to input
characters when there was
insufficient free space in memory.
An attempt was made to input a
value that is outside of the settable
range.
An attempt was made to set the
numbering function a second time
on a page in which numbering was
already set.
An attempt was made to input
characters in excess of the number
of characters that can be input.
An attempt was made to specify a
folder name that already exists.
An attempt was made to save a file
while there was insufficient free
space remaining.
An attempt was made to load or
delete a file even though no files
have been saved.
An attempt was made to load or
delete a file in a folder even though
no files have been saved in that
folder.
An attempt was made to save more
than 50 files in a single folder.
Symbols cannot be entered when
the character size is set to 1.3 mm.
An attempt was made to select
"Auto" on the Segment Leng
selection display for the page
in which a maximum number
of characters were input with
"Expansion" selected on the Plate
Printing Area selection display.
Check the User's Guide and make
the correct setting.
Check the User's Guide and make
the correct setting.
The character spacing cannot
be selected when the printing
orientation is set as "Vert/Hor
char".
Prepare data to be pasted by
cutting or copying a page.
Delete some input data to free up
some space.
Check the User's Manual and make
the correct setting.
The numbering setting can only be
made once per page.
Input only the allowed number of
characters.
Specify a different folder name.
Delete any unnecessary files to
create free space.
Confirm the file save destination
folder. Save the file once more.
Either delete any unnecessary files
and then save the desired files in
that folder, or else save the files in
a different folder.
Change the character size to a
value other than 1.3 mm.
Delete characters to reduce
the number of characters to a
changeable one, and then change
the setting.