Changing The Printing Speed; Table Of Contents; High - Canon Mk2500 User Manual

It is possible to change the printing speed. However, if the printing speed is too fast for the environment in
which the printer is used and the characteristics of the print media, printing may shift out of position or be
otherwise affected. The print speed can be set to one of three levels: "Low*", "Middle*" or "High*".
* When "Low" is selected, characters can be printed on 30 tube segments/min. When "Middle" is selected, characters can be printed on 35 tube
segments/min. When "High" is selected, characters can be printed on 30 tube segments/min. (The segment length is 20 mm, five "3mm 100%"
characters are entered, and each tube is cut into two segments. This feature is available only for printing on tube.)
If the characters printed at a temperature below 20°C with "High" selected on the Print
speed selection display are faint, select a lower printing speed.
• The Settings display appears.
▲ ▼
• The Print speed selection display appears.
▲ ▼
• The display returns to the character input display. The print
speed has now been set to Low.
You can select a printing speed from among low speed, middle speed, and high speed. The
actual printing speed varies depending on the media type.
Tube
Clear tube
Heat-shrinkable tube
4 mml. D. strip
Label
Wraparound tape
Plate
Low 18.5
Middle 25

High

40
Low
25
Middle
High 40
Low
Cannot
Middle
be cut.
High
mm/sec
20
20
18.5
40