By selecting "Expansion" on the Plate Printing Area selection display and selecting character size and number
of lines accordingly, the printable number of characters within the short pitch will increase.
If "Expansion" is selected on the Plate Printing Area selection display, only plates can be used as the printing media.
Printing on a plate for a narrow width terminal block.
•
Press [▲] or [▼] to select [2mm 50%].
•
Press [▲] or [▼] to select [2 lines].
•
Press [▲] or [▼] to select "Specify".
•
Press [5], and then input "5"mm as the segment length.
•
Press [Enter].
•
Press [▲] or [▼] to select [Expansion].
•
Press [Enter].
•
The message appears.
•
Press [Enter].
•
Press [▲] or [▼] to select [Centered].
•
Press [Enter].
•
Press [▲] or [▼] to select [On].
•
Press [Enter].