Replacing The Ribbon Cassette - Canon Mk2500 User Manual

If the message "End of ribbon." appears while printing is in progress, replace the ribbon cassette as shown
below. Contact your nearest dealer to purchase replacement ribbon cassettes.
• Pull the cassette out toward you.
Place the removed ribbon cassette into the plastic bag, then discard it immediately in
compliance with local regulations regarding the disposal of such items.
• Remove the stopper and then fix the slack in the ribbon.
The printer cannot detect the ribbon if it has any slack in the ribbon. Always be sure to
take up slack in the ribbon when installing a cassette.
Dispose the removed stopper according to local government regulation.
• Push the cassette in until it clicks into the place.
If the ribbon cassette is loose, the ribbon may not be detected, so be sure to press it in until
it clicks.
CAUTION
Do not hold the connection terminal (metal part) of the cassette. Doing so could cause
an improper recognition of the cassette.
• Printing resumes from the page following the page that was
interrupted.