Message Is Displayed - Canon GX6500 Series Online Manual

Table of Contents

Advertisement

Message Is Displayed

This section describes some of the messages that may appear.
If a message appears on the printer's touch screen, see below.
Message Appears on the Printer's Touch Screen
If a message appears on the computer, see below.
Error Regarding Automatic Duplex Printing Is Displayed
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
Writing Error/Output Error/Communication Error (Windows)
Other Error Messages (Windows)
Message Appears on the Printer's Touch Screen
Check the message and take the appropriate action.
• Power was not turned off correctly the last time. Press the
The printer may have been unplugged while the power was still on.
Select OK on the printer's touch screen to cancel the error.
See
Unplugging the Printer
• Cannot print the specified PDF file because an error has occurred while scanning the file, the
format is not supported, or the file is too large.
◦ Make sure the PDF file is printable from a USB flash drive. For more information, see Printing
Documents (PDF File) Saved on USB Flash Drive.
Note
• The names of the PDF files are displayed even though they cannot be printed from the USB
flash drive. We recommend that you check whether they are printable.
◦ Data edited or processed on a computer must be printed from the computer.
• The specified PDF file contains unprintable data. Some portions may not be printed.
PDF file which contain lot of graphics or hi-resolution images may lose that data or stop before
printing is completed. In this case, print from the computer.
• Saved data is not of a supported type.
◦ There is no image data or document data saved on the USB flash drive that can be read by this
printer.
◦ The printer may not recognize the file if the file name or folder path contains certain characters.
Use only alphanumeric characters.
◦ Image data edited or processed on a computer must be printed from the computer.
Note
• When a photo which has been processed on a computer is selected, "?" is displayed on the
printer's touch screen.
to unplug the printer correctly.
495
button when turning power off.

Advertisement

Table of Contents
loading

Table of Contents