Canon Mk2500 User Manual page 135

▲ ▼
• The Full Cut Depth display appears.
▲
• Each time [ ▲ ] is pressed, the cutting depth increases by one.
When adjusting the depth for a half cut, pressing [▼] reduces the depth.
• The display returns to the character input display. The cutting
depth is now one step deeper.
If the cutter will not cut well no matter how much you adjust the cutting depth, try using
"Force full cut". When force full cut is performed, the cutter cuts to the deepest depth
possible. If the cutter still does not cut even when using force full cut, the cutter needs to
be replaced. For details on the replacement procedure, refer to "Replacing the cutter" (
page 133).
• The Maintenance display appears.
• The full cut confirmation display appears.
• A full cut is made.
▲ ▼
◄ ►