Canon Mk2500 User Manual page 153

Torn ribbon
Cannot select printing media other
than the plate.
* The defective jack of the AC adapter cannot be repaired. Please purchase a new AC adapter from your nearest
dealer.
* Between the printing start point and the point about 60 mm away from it, the tube is cut to a length which is
slightly shorter than the specified segment length due to the machine structure.
The tube is stained with sticky
matter similar to the glue.
There is a page for which
"Expansion" was selected on
the Plate Printing Area selection
display.
Use a clean tube.
Select "Auto" on the Seg Length
selection display according to
"Printing with short pitch width"
(page 111) and "Changing the
length and the character alignment"
(page 99).