•
The segment length selection display appears.
When the specified segment length is shorter than 8.5 mm, the printer specifications
change depending on the media type. Refer to "List of Function" (
▲
▼
If you accidentally input an incorrect number, press [Back Space] to delete the number
and then input the correct one.
To change the segment length of all pages after entering characters, press [ ◄ ] or [►]
to select "All".
Some segment length cannot be specified depending on the character size.
•
The Plate Printing Area selection display appears.
▲
▼
•
The character alignment selection display appears.
▲
▼
If you accidentally input an incorrect number, press [Back Space] to delete the number
and then input the correct one.
If "Normal" is selected on the Plate Printing Area selection display, you can specify
the left-justification margin between 2 mm and 5 mm.
If you select "Expansion," you cannot specify the left-justification margin. It is fixed at
0 mm.
If "Expansion" is selected on the Plate Printing Area selection display, only plates can
be used as the printing media.
•
The display returns to the character input display.
page 151).