When A Tube Or Label Tape Is Not Ejected/Fed - Canon Mk2500 User Manual

Using the Feed function in the maintenance mode allows you to feed the tube or label tape loaded in the printer.
Note that this function should be used only when the tube or label tape is not ejected or fed properly. Feeding
the tube or label tape continuously can damage the printing media or winds the ribbon of the ribbon cassette
around other parts, causing a jam.
For example, use the Feed function in the following cases:
•
Printing media is not released from the feed roller even when you press the [Remove] key to replace the printing media.
•
The printer is operating but printing media is not ejected after completion of printing.
In this case, the tube or label tape may be jammed inside the printer. Open the cover and check whether the tube or label tape is jammed. If it is
jammed, follow the jam removal procedure. Refer to "Actions to Take against Other Jams (When the "Media JAM" message is not displayed)"
( page 126).
• A function selection display appears.
• A display indicating how to feed the printing media forward or
reverse appears.
▲ ▼
◄ ►