Other Operations; Removing The Print Media - Canon Mk2500 User Manual

When changing the print media from tube to label tape, or from label tape to tube, it is necessary to take out the
media that is currently set in the printer. However, because the printer feeds tube or label tape into its transport
rollers, it is not possible to simply pull out the current media. It is first necessary to perform the operation
described below to release the tube or label tape that has been fed into the unit.
These operations are the same for heat shrink tube, wrap around tape, 4mm I.D. strip, plate and clear tube.
Even after the printing media has been removed, the printer operates.
• A confirmation display appears.
◄ ►
• The display at right appears, and the tube or label tape is
released by the transport rollers.
Once the preparations described above have been completed, take out the printing media as described
below. For details on how to load the new printing media, refer to "Part 2".
After pressing [Enter], use the feed function if the tube or label is not released from the
transport roller (unable to remove) even after the printer has stopped. ("When a Tube
or Label Tape is Not Ejected/Fed" ( page 128))