Canon Mk2500 User Manual page 41

• Push the cassette in until it clicks into the place.
If the ribbon cassette is loose, the ribbon may not be detected, so be sure to press it in until
it clicks.
CAUTION
Do not hold the connection terminal (metal part) of the cassette. Doing so could cause
an improper recognition of the cassette.
• Align the tab on the label tape cassette with
the hole in the printer, and then push the
cassette in until it clicks into the place.
Confirm that the release paper is not peeled when setting the
label cassette. Before setting, cut the part where the release
paper is peeled or the end is not straight.
• page 18.
• Close the cover completely so that it clicks shut.
These cassettes must be purchased separately. Contact your nearest dealer for details.
This is used to print characters on label tape.
This is used to print characters on heat shrink tube.
This is used to print on wrap around tape.
This is used to print characters on 4mm I.D. strip.