Remove the tube or label tape cassette as follows, and install a new one.
Contact your dealer if you need to purchase tube or label tape cassettes.
The same procedure as for a label tape cassette applies when using heat shrink tube, wrap around tape and 4mm I.D. strip. Clear tube and plate
is handled in the same way as regular tube.
•
Media is ejected in the opposite direction.
After pressing [Enter], use the feed function if the tube or label is not released from the
transport roller (unable to remove) even after the printer has stopped. ("When a Tube or
Label Tape is Not Ejected/Fed" (
Dispose the used tubes and label cassettes according to local government regulation.
•
While pulling the lever to the right, lift and detach the label tape
cassette.
•
See "Part 2 Basic Operation" for detail.
page 128))