Canon Mk2500 User Manual page 23

Open this cover when you need to load a cassette
or tube.
Pull this lever to the left to open the cover.
Use this switch to turn the power on and off. Flip
the switch to the "|" position to turn the power on,
and flip the switch to the " " position to turn the
power off.
Displays text that has been input or the
information about settings.
Place the ribbon cassette here.
Mount the tube attachment or label tape cassette
here. The optional Tube Warmer also mounts
here.
The cutter cuts printing media automatically. The
cutter can be replaced.
This is the receiver for the cutter blade when
cutting printing media. When the cutter is
replaced, the cutter receiver is replaced at the
same time.
This device prints by applying heat to a ribbon.
As it becomes very hot, not touch this device
while printing is in progress or immediately after
printing.
This roller feeds printing media to the print head.
This roller feeds printing media past the print
head.
This roller feeds printed printing media to the
cutter.
Pull this lever to the right to release transport
roller 3. Use this lever when clearing jammed
printing media.
Insert tube or plate here (when attachment
installed).
Printed printing media emerge here.
Input text to be printed and data for settings
through this keyboard.
Connect the AC adapter cable here.
Open this cover to connect the USB cables of
the PC connection kit or/and the Tube Feeder
(optional).
This guide is installed when printing on wrap
around tape. Remove it when printing to other
media.
Hold this handle when carrying the printer.
This is to read out information of the ribbon
cassette. Do not touch and deform the connector.