Making A Full Cut After A Specific Number Of Tube Segments - Canon Mk2500 User Manual

For example, if character data as shown in Fig. 1 is input and the number of tube segments to be printed is set
as "3", tube segments are produced as shown in Fig. 2.
Initially, the printer is set to make one full cut after all tube segments are printed, but it is possible to change
this setting so that a full cut is made after a certain number of tube segments are printed, as shown in Fig. 3.
• The Set Cut display appears.
▲ ▼
• The Full Cut display appears.
▲ ▼
• The display returns to the character input display.