It is possible to print characters with their orientation changed as shown below. And it is also possible to
change the orientation on a page basis or for all pages together after entering characters.
If entered characters are expected to be omitted from the page after the orientation is changed on a page basis,
it is not possible to select such an orientation with the "Page" option. And it is not possible to change the
orientation to "Vertical / Horizontal Character" after entering characters.
Once character data has been entered, the "Vert/Hor char" selection can no longer be made. In this case, you must first delete all character data,
then make the "Vert/Hor char"selection and re-enter the character data.
Printing might not be performed correctly in some orientations, depending on the settings for the media size and the character size.
•
The Orientation display appears.
To change orientation of all pages after entering characters, press [ ▼ ] or [►] to select
"All".
▲
▼
•
The character input display appears.
•
This is because you are going to input two lines.
▲
▼
•
The character input display now shows two lines.