Page 16 - Switch Divert On
Diverting Calls
Switch Divert On
4406D+, 4606D+ and TransTalk MDW 9040 users must use short codes to activate
these features.
To set the divert all calls (unconditional) number and modes:
1.
2.
3.
4.
5.
6.
7.
To set the divert on busy/no answer number and modes:
1.
2.
3.
4.
5.
6.
7.
Call Forwarding
You can forward you calls to another extension. While forwarding your calls your phone
will display a D in the top-right of the display. If the station that you are forwarding calls
to also has forwarding active, your call will go to the final destination.
To set call forwarding:
1.
2.
3.
4.
To clear call forwarding:
1.
2.
3.
Page 16 - Diverting Calls
Switch Divert On
Press Menu
twice.
Press and select ProgA.
Select Divrt .
Set the required divert number. Use the left-hand display key to backspace. When
you have activated CFrwd (see below), the extension number is automatically
filled in with the call forwarding number. Select Next.
Use the display keys to switch Group (hunt group) and Divrt between Y (on) and
N (off). Diverting group calls is only used when divert all calls is also on. It also
only works for calls to circular or linear groups.
Select Done.
Press Exit
.
Press Menu
twice.
Press and select ProgA.
Select OnBsy.
Set the required divert number. Use the left-hand display key to backspace. Select
Next.
Use the display keys to switch OnBsy (busy) and NoAns (no answer) between Y
(on) and N (off).
Select Done.
Press Exit
.
Press Menu
.
Using the and keys, display and then select CFrwd.
(This feature can also be set under a DSS key, see Programming Functions
Against DSS Keys on page 26.)
Set the required divert number. Use the left-hand display key to backspace. When
you have activated Divert (see above), the forward number is automatically filled
in with the Divert number. Then select Done.
Press Exit
.
Press Menu
.
Using the and keys, display and then select CFrwd.
Press Exit
.
44/46/64xx & TransTalk MDW 9040 User's Guide
40DHB0002UKEG – Issue 10 (9th February 2004)
Diverting Calls