Cpark; Cpkup; Dir; Dpkup - Avaya IP Office 44/46/64xx User Manual

Admin Functions

CPark

Park the current call. This function can be programmed with or without a park slot
number.
If programmed with a park slot number, pressing the appropriate DSS key will
park/unpark calls from that park slot. The DSS key lamp is lit when a call is parked in
that park slot.
If programmed without a park slot number, calls being parked are assigned a number
based on the parking telephone's extension number plus 0, 1, 2 etc. in sequence.
Whilst the user has parked calls the DSS key lamp is lit. Pressing the key while not on
a call will display the parked calls and allow any of those calls to be unparked.
In all cases, calls parked by a user will recall that user if not unparked after a set delay.

CPkup

Answer a call ringing elsewhere on the telephone system. This function does not
require any data entered when programmed. Pressing the programmed DSS key will
answer (pickup) a call currently ringing on the telephone system.
Note: We recommend that this function is only used in systems with a small number of
users all located in one area. Use of this function on larger systems may lead to
confusion.

Dir

Access the telephone system directory (see Using the Directory on page 8. This
function does not require any data entered when programmed.

DPkup

Answer a call currently ringing at another extension or group. This function can be
programmed with or without a target extension or group number. If programmed
without a target number, the number should be dialed after pressing the DSS key.

Drop

Clears the current connected call. Temporarily pauses the ringing of an incoming call.
This function does not require any data entered when programmed.
[break]

GrpPg

Page a group. Those phones in the group that support handsfree auto-answer will hear
the page call without having to take any action. This function can be programmed with
or without a target group number.
If programmed without a target group number, the group number should be dialed after
pressing the programmed DSS key.

HdSet

Activate headset mode. This function does not require any data entered when
programmed. When this function is on, the appropriate DSS key lamp is lit.

Hfans

Sets the phone to auto-answer internal calls after a single ring. This function does not
require any data entered when programmed. When on the appropriate DSS key lamp
is lit.

HGNS+

Put a specified hunt group into night service mode. This function requires entry of the
hunt group number when programmed.
44/46/64xx & TransTalk MDW 9040 User's Guide
40DHB0002UKEG – Issue 10 (9th February 2004)
DSS Key Functions - Page 29
DSS Key Functions - Page 29
Admin Functions