Programming Using The Admin Menu - Avaya IP Office 44/46/64xx User Manual

Programming Functions Against DSS Keys

Programming Using the Admin Menu

To add a function to a DSS key using Admin:
1.
2.
3.
4.
5.
6.
To remove a function from a DSS key using Admin:
1.
2.
3.
4.
5.
6.
7.
44/46/64xx & TransTalk MDW 9040 User's Guide
40DHB0002UKEG – Issue 10 (9th February 2004)
Press Menu .
Using the and keys, display and then select Admin. Use the and keys to
display the function you want and then press the key below that function. Selecting
Expl? explains the function names.
• For a list of the available functions see below and for details of the functions see
Programming Functions Against DSS Keys on page 26 on page and Error!
Reference source not found. on page Error! Bookmark not defined..
If the function requires a parameter such as an extension or group number, you
can enter it now. If you don't enter a parameter, it will be requested when you
press the DSS key during usage.
Press the DSS key against which you want the function programmed.
• If the key is already programmed you will see options to Repla, Keep or Delete.
Select the option required.
Select Cont.
Either select another function and program another DSS key or press Exit
Press Menu .
Using the and keys, display and then select Admin.
Press the DSS key against which the function is programmed.
Press the key below Clear and then press the DSS key again.
Select Delet to remove the function.
Press the key below Cont.
Either select another function to program another key or press Exit
DSS Key Functions - Page 27
DSS Key Functions - Page 27
Programming Functions Against DSS Keys
.
.