Changing The Volume; Changing The Ringer Sound; Using Headsets - Avaya IP Office 44/46/64xx User Manual

Changing the Volume

Changing the Volume
You can alter the volume of the handsfree speaker, the handset speaker and the
ringer.
To change the ringer volume:
1.
To change the speaker volume:
1.
2.

Changing the Ringer Sound

This feature is available on the 6400 series phones only. You can select the type of
ring that your phone uses.
To change the ringer sound:
(This feature can also be set under a DSS key, see Programming Functions Against
DSS Keys on page 26.)
1.
2.
3.

Using Headsets

Using headsets is documented separately. Refer to your System Administrator.
44/46/64xx & TransTalk MDW 9040 User's Guide
40DHB0002UKEG – Issue 10 (9th February 2004)
Without lift the handset, press the either end of the volume button. Use either end
of the button to adjust the volume.
Lift the handset to adjust handset volume or press Spkr
volume.
Press the either end of the Volume
the volume up or down .
Without lift the handset, press Conf
You will hear a ring. Press Conf again to hear another ring type.
Repeat pressing Conf until you hear the ring that you want. Wait until you hear a
ring again and then a tone. The ring is now saved.
Phone Controls - Page 21
to adjust the handsfree
key. Use either end of the button to adjust
.
Phone Controls - Page 21
Changing the Volume