Ogm Mode Selection - Panasonic KX-TA624 Installation Manual

502
Description
Selection
Default
Programming
Conditions
Feature References
4-84 System Programming
4.2

OGM Mode Selection

Selects how the two outgoing messages (OGM) are used. There are
two modes as follows.
MODE 1: both OGM1 and OGM2 are used for DISA1 so that the
system can receive two incoming calls via DISA at the
same time.
MODE 2: OGM1 is used for DISA1 and OGM2 is used for
DISA2.
MODE 1 / MODE 2
MODE 1
1. Enter 502.
Display: OGM Selection
2. Press NEXT.
Display example: MODE 1
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
• Program [414]–[416] "Outside (CO) Line Mode — Day/Night/Lunch"
are used to assign DISA1 or DISA2 to each outside (CO) line according
to this assignment.
• If an optional OGM/FAX Detection card is not installed, this assignment
should be "MODE 1".
Section 3, Features
Direct Inward System Access (DISA)
Outgoing Message (OGM)
System Programming