Cpc Detection For Outgoing Calls - Panasonic KX-TA624 Installation Manual

4.2 System Programming
Description
Selection
Default
Programming
Condition
Feature Reference

CPC Detection for Outgoing Calls

Enables or disables CPC Signal Detection during an outside call in
progress. If enabled, the system disconnects the line at the time set
in program [420] "Calling Party Control (CPC) Signal" when the
CPC signal is detected.
• Outside (CO) line number: 1 – 6,
• Enable (detect) / Disable (will not detect)
Disable
1. Enter 421.
Display: CPC Out Detect
2. Press NEXT.
Display: CO NO?
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all outside (CO) lines to the same selection, press the
in step 3. In this case, the display will show: CO
Section 3, Features
Calling Party Control (CPC) Signal Detection
( = all outside (CO) lines)
: Mixed.
System Programming
421
key
4-79