Programming Example - Panasonic KX-TA624 Installation Manual

4.1.4

Programming Example

Sample of Description
(1)
001 4.2 System Programming
System Speed Dialing Entry
Description (4)
Used to program the System Speed
Dialing numbers. These numbers are
available to all extension users. There
are 100 numbers available from 00 to 99.
Selection (5)
• Speed dialing number: 00 – 99
• Telephone number: 32 digits (max.)
Default (6)
All speed dialing numbers – Not stored
Programming (7)
1. Enter 001.
Display: Speed Dialing
2. Press NEXT.
Display: Speed NO?
3. Enter a speed dialing number.
Pressing NEXT also can enter speed
dialing number 00.
Display example:
4. Enter a telephone number.
To delete the current entry, press
CLEAR.
To change the current entry, press
CLEAR and enter the new number.
5. Press STORE.
6. To program another speed dialing
number, press NEXT or PREV, or
SELECT and enter the desired
speed dialing number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions (19)
• Each speed dialing number has a
maximum of 32 digits. The valid
characters are 0 – 9,
and the FLASH, PAUSE, SECRET
and – (hyphen) buttons.
Feature Reference (20)
4-8 System Programming
The following programming instructions assume that the user has
already entered the programming mode.
Example: Program [001] "System Speed Dialing Entry"
(3)
(8)
(9)
(10)
(11)
(12)
00:Not Stored
(13)
(14)
(15)
(16)
(17)
(18)
, and # keys,
•
•
•
•
•
Section 3, Features
System Speed Dialing
(1) Program address: This address is printed at the top of
(2)
every page to quickly find the desired program.
(2) Mode title.
(3) Program title.
(4) Provides a more detailed description of the program.
(5) Shows the user the assignable choices.
(6) Shows the user the factory default setting.
(7) Shows the user programming procedures step by step.
• During programming, use the overlay.
• Before starting to program, enter the programming
mode. (See "Entering the programming mode" on
page 4-4.)
(8) Enter the program address.
(9) The display shows the program title.
(10) Press NEXT shown on the overlay.
(11) The display asks the user to enter a speed dialing
number.
(12) If the telephone number has already been stored, the
number is displayed.
(13) Enter the telephone number that the user wants to store.
The entry will be displayed as the user enters the digits.
(14) Pressing CLEAR erases the whole entry.
(15) The entry is now stored.
The indicator lights red and a confirmation tone lets the
user know that storing is completed.
(16) Select the best way for the user to store another speed
dialing number. Pressing NEXT/PREV allows the user
to select the next higher/lower speed dialing number.
The user can also continue pressing a button until the
desired entry is displayed. If the user presses SELECT
and the desired speed dialing number, the selected code
will be displayed.
(17) The user can continue programming another entry.
(18) After all the entries have been stored, complete this
program by pressing END. After pressing END, the
user can go to any desired program address. The user
can return to the initial system programming message
mode at any time by pressing END.
(19) Tells the user what should be noted or considered when
doing the program.
(20) Lists all of the features related to the program. These
features are described in Section 3.
Explanation