Disa No Dial Mode - Panasonic KX-TA624 Installation Manual

510
Description
Selection
Default
Programming
Conditions
Feature References
4-92 System Programming
4.2

DISA No Dial Mode

Selects the mode when nothing is dialed after the OGM or a beep
after a programmed length of time for the DISA1 and DISA2
modes. There are two modes as follows.
Intercept: the call is directed to the extensions assigned in
programs [408]–[410] for the time programmed in
[509] "DISA Ringing Time After Intercept".
Disconnect: the call is disconnected.
• DISA1 / DISA2
• Intercept / Disconnect
DISA1 and DISA2 — Intercept
1. Enter 510.
Display: No Dial Mode
2. Press NEXT.
Display example: DISA1:Disconnect
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press NEXT or PREV to program the other parameter.
6. Repeat steps 3 through 5.
7. Press END.
None
Section 3, Features
Direct Inward System Access (DISA)
Intercept Routing
System Programming