Panasonic KX-TA624 Installation Manual page 233

4.2 System Programming
Time (Day/Night/Lunch) Service Start Time
Conditions
Feature Reference
8. Enter the minute.
To change the current entry, press CLEAR and enter the new
minutes.
9. Press .
10. Press SELECT for AM or PM.
11. Press STORE.
12. To program another time service mode, press SELECT.
13. Repeat steps 6 through 11.
14. To program another day of the week, press NEXT or PREV.
15. Repeat steps 4 through 14.
16. Press END.
• If it is not necessary to change the time service, select "None" in step 6.
• To select the desired day, the user can also keep pressing NEXT in step
3. To assign every day of the week to the same selection, press the
key in step 3. In this case, the display will show: Every day.
• The day or night mode is interrupted during the lunch mode. After the
lunch mode is finished, the day or night mode will start again.
Section 3, Features
Time (Day/Night/Lunch) Service
(contd.)
System Programming
007
4-19