Panasonic KX-TA624 Installation Manual page 290

419
Automatic Designated Outside (CO) Line Access
Description
Selection
Default
Programming
Condition
Feature References
4-76 System Programming
4.2
Assigns the sequence in which outside (CO) lines will be accessed
during the Automatic Line Access mode. When a user dials the
feature number for automatic line access (9), an idle line is
searched for in the programmed outside (CO) lines.
• Outside (CO) line number: 1 – 6,
• Enable / Disable
All outside (CO) lines — Enable
1. Enter 419.
Display: Auto Line Access
2. Press NEXT.
Display: CO NO?
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 and 6.
8. Press END.
• To assign all outside (CO) lines to the same selection, press the
in step 3. In this case, the display will show: CO
Section 3, Features
Line Access, Automatic
Line Preference – Outgoing
System Programming
( = all outside (CO) lines)
key
:Mixed.