Disa Busy Mode - Panasonic KX-TA624 Installation Manual

506
Description
Selection
Default
Programming
Condition
Feature References
4-88 System Programming
4.2

DISA Busy Mode

Selects the mode when destination extension of the call via DISA is
busy. There are three modes as follows.
Call Waiting: a call waiting tone is sent and then the call is held
until the called party responds.
Disconnect: the call is disconnected after the busy tone.
DISA2: OGM2 is sent to the caller and the system waits for
another destination when the first destination is busy.
Call Waiting / Disconnect / DISA2
Disconnect
1. Enter 506.
Display: DISA Busy Mode
2. Press NEXT.
Display example: Disconnect
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
• In program [502] "OGM Mode Selection", "MODE2" should be
selected if "DISA2" is selected in this program.
Section 3, Features
Direct Inward System Access (DISA)
Outgoing Message (OGM)
System Programming