Panasonic KX-TA624 Installation Manual page 93

3 Features
C
all Transfer, Unscreened – to Extension
Description
Conditions
Programming References
Feature Reference
Operation Reference
— User Manual
Allows a user to transfer an intercom or outside call directly to an
extension party. After dialing the destination extension, the user
waits for the ringback tone and replaces the handset.
• If the destination party does not answer within the pre-determined time,
the call will return to the user (Transfer Recall).
• This feature is possible when the destination is sending a ringback or
busy tone. If the destination is busy, Camp-On Transfer occurs.
• The ringing signal pattern depends on the party being transferred:
outside or extension call ringing.
• If music on hold is enabled, music is sent to the caller while being
transferred. Sending a cyclic tone or music on hold to the caller is
programmable by program [111].
Section 4, System Programming
[005] One-Touch Transfer Using a DSS Button
[111] Hold Music Selection
[201] Transfer Recall Time
Section 3, Features
One-Touch Transfer Using a DSS Button
Telephone Features
Call Transfer — to Extension
C
Features 3-31