Disa Tone Selection After The Security Code - Panasonic KX-TA624 Installation Manual

518

DISA Tone Selection after the Security Code

Description
Selection
Default
Programming
Conditions
Feature Reference
4-100 System Programming
4.2
Enables or disables sending a beep to a caller after the Security
Code is entered. If enabled, a beep is sent to the caller when the
code entered is the same as one of the security codes assigned in
program [512] "DISA Security Codes".
Enable / Disable
Enable
1. Enter 518.
Display: DISA Dial Tone
2. Press NEXT.
Display: Enable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
None
Section 3, Features
Direct Inward System Access (DISA)
System Programming